Orthman 8315 Cultivator Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 55

Orthman 8315 Cultivator Скачать руководство пользователя страница 36

TROUBLESHOOTING

AVOID CRUSHING

. Make sure all personnel are clear of the implement. Lower implement to the

ground, place tractor in park, turn off engine, and remove key.

USE BAR STANDS TO SUPPORT THE IMPLEMENT.

Park implement on a clean, dry, and

level surface. An uneven surface could cause implement to shift or fall, resulting in injury or death, as well
as implement damage. Securely support all implement components that must be raised. Remove buildup
of grease, oil, or debris prior to adjusting implement.

DANGER

CAUTION

5- 5

REMOVAL OF INTERNAL

CYLINDER

DISCONNECT STRAPS:

1.

Remove bolt that holds pin in.

2.

Remove pin. Weight of cylin-

der assembly may need to be
supported to remove pin.

bolt

pin

REMOVE CYLINDER PIN:

1.

With snap-ring pliers remove snap ring from pin (in-between bars).

2.

Remove pin from toolbar. (cylinder should be loose at this point).

(for re-assembly use alignment punch to align cylinder and pin)

cylinder pin

snap ring

REMOVE CYLINDER:

1.

Make sure hose ends are covered.

2.

Tie twine or wire to hoses to aid in re-assembly.

3.

Pull cylinder out of toolbar tube.

Reverse process for re-assembly.

CAUTION!

BE EXTREMELY CARE-

FUL WHEN WORKING AROUNG

UNSHIELDED SHARP EDGES. INJURY

MAY RESULT FROM CONTACT WITH

SHARP EDGES.

«
...
34
35
36
37
38
...
»

Содержание 8315 Cultivator
























































Отзывы:

Нет отзывов