FIELD SETTINGS
Raise up
Make sure three point pins are not excessively worn.
Make sure implement/toolbar is attached securely to
three point tractor hitch.
Make sure cab hydraulic control configuration is
easily accessible and to the preference of the primary
operator.
Make sure tractor is adequately ballasted for safe
operation. Refer to tractor owner’s manual for proper
ballasting instructions.
After tractor hook-up raise toolbar and remove Bar
stand pin and raise bar stand to raised position, and
replace bar stand pin.
Move Rigid wing lock pin from Rigid wing lock position
to Lock pin storage position. The toolbar will not fold
with the Rigid wing lock pins installed in the Rigid lock
position.
FIELD OPERATION
W A R N I N G
off
W A R N I N G
4 - 1
Bar stand pin
AVOID CRUSHING.
Do not stand between tractor and implement when connecting or disconnect-
ing implement. Injury or death can result from being trapped between the tractor and implement.
AVOID CRUSHING.
Make sure all personnel are clear of the implement. Lower implement to the
ground, place tractor in park, turn off engine, and remove key.
USE BAR STANDS TO SUPPORT THE IMPLEMENT.
Park implement on a clean, dry, and
level surface. An uneven surface could cause implement to shift or fall, resulting in injury or death, as well
as implement damage. Securely support all implement components that must be raised.
PLACE TRACTOR IN PARK AND REMOVE KEY BEFORE
DISMOUNTING TRACTOR TO ADJUST IMPLEMENT.
NEVER ALLOW RIDERS ON TRACTOR OR IMPLEMENT.
Riders hinder operator visibil-
ity and can be thrown from the implement and/or be struck by foreign objects resulting in injury or death.
DANGER
DANGER
Lock pin storage position
Rigid wing lock position
Rigid wing lock pin