Orthman 8315 Cultivator Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 55

Orthman 8315 Cultivator Скачать руководство пользователя страница 21

PREPARATION AND SETUP

PREPARING THE TOOLBAR

The standard folding configuration of the

Vertical Fold Tillage Toolbar

is 180°. Therefore, it will be equipped

with 180° wing rests and the base end of the internal hydraulic cylinders will be in the 180°
position. Please refer to the

Change Degree of Fold

section of this manual for more information.

If 90°, 115°, 135°, or 170° folding configuration is desired, these folding options are illustrated and ex-
plained in the

Change Degree of Fold

section of this manual. Field adjustments are illustrated and explained

in the field settings section of this manual.

If an Orthman row unit is used in conjunction with the

Vertical Fold Tillage Toolbar

, be sure to consult the

row unit operator’s manual before attempting to operate the implement. Read and understand operator
manuals for machinery used in conjunction with the

Vertical Fold Tillage Toolbar.

Before each use, check hardware for wear and proper torque. Replace damaged or missing hardware with
hardware of an identical grade to restore implement to original specifications.

IMPLEMENT TO TRACTOR

CONNECTION

AVOID CRUSHING.

Do not stand between tractor and implement when connecting or disconnect-

ing implement. Injury or death can result from being trapped between the tractor and implement.

AVOID CRUSHING.

Make sure all personnel are clear of the implement. Lower implement to the

ground, place tractor in park, turn off engine, and remove key.

USE BAR STANDS TO SUPPORT THE IMPLEMENT.

Park implement on a clean, dry, and

level surface. An uneven surface could cause implement to shift or fall, resulting in injury or death, as well

as implement damage. Securely support all implement components that must be raised.

DANGER

DANGER

CAUTION

OPERATOR’S

MANUAL

3 - 2

«
...
19
20
21
22
23
...
»

Содержание 8315 Cultivator
























































Отзывы:

Нет отзывов