Orthman 8315 Cultivator Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 55

Orthman 8315 Cultivator Скачать руководство пользователя страница 34

TROUBLESHOOTING

AVOID CRUSHING

. Make sure all personnel are clear of the implement. Lower implement to the

ground, place tractor in park, turn off engine, and remove key.

USE BAR STANDS TO SUPPORT THE IMPLEMENT.

Park implement on a clean, dry, and

level surface. An uneven surface could cause implement to shift or fall, resulting in injury or death, as well
as implement damage. Securely support all implement components that must be raised. Remove buildup
of grease, oil, or debris prior to adjusting implement.

DANGER

CAUTION

PROBLEM:

Wings do not fold or unfold. (cont.)

SOLUTION OPTIONS:

CAUTION!

BE EXTREMELY CAREFUL WHEN WORKING AROUNG UNSHIELDED

SHARP EDGES. INJURY MAY RESULT FROM CONTACT WITH SHARP EDGES.

4.

Hydraulic cylinder restrictors could be plugged.

• Refer to (pg. 5 - 4 & 5 - 5) for removall process of cylinder assembly.

1. Remove hose from cylinder.

2. Remove adaptor that goes in-between hose and cylinder port.

3. Restrictor is located inside the adaptor and can be removed with allen wrench.

4. Restrictor is made from a set screw with a .055 hole drilled in it.

5. Check to see if hole is plugged.

6. Clean and re-install.

• Refer to (pg. 7 - 4 & 7 - 5) for cylinder component identification and replacement parts.

5.

Cylinder seal kit is bad.

• Refer to (pg. 5 - 4 & 5 - 5) for removal process of cylinder assembly.

• Refer to (pg. 7 - 7) for cylinder internal component identification and seal kit part num-

ber.

NOTE:

To avoid foreign objects in hydraulic oil, always clean hydraulic tips

and outlets. Foreign material can ruin cylinders and plug restrictors.

5- 3

«
...
32
33
34
35
36
...
»

Содержание 8315 Cultivator
























































Отзывы:

Нет отзывов