manualshive.com logo in svg

Orthman 8315 Cultivator, Руководство пользователя, Страница: 27 / 55

Поделиться
Скачать
Orthman 8315 Cultivator Скачать руководство пользователя страница 27

PREPARATION AND SETUP

Vertical Fold Tillage Toolbars

 are standard with 180° fold configuration. If 115° 

or 135°  fold configuration is desired, adjustable wing rests must be ordered 

separately (see adjustable wing rest parts page). 

The adjustable wing rests aid in relieving stress put on components of the 

internal hydraulic cylinder while the wings are folded. The adjustable wing 

rests also prevent guage wheels from contacting the tractor cab.

TO MOUNT ADJUSTABLE WING REST:

1.

     Mount wing rest in the same location the original 180° fold wing 

rest was once mounted. 

2.

    Use provided U-bolts to fasten to toolbar. 

 

TO ADJUST WING REST: 

1. 

   Before adjusting, be sure the internal hydraulic cylinder is in the 

correct position for the desired degree of folded wing placement. If 

internal hydraulic cylinder must be moved, refer to the instructions for 

“Changing Degree of Fold” on the previous page. 

2. 

   Be sure hydraulic hoses are properly connected to the tractor and 

that there are no leaks in the system.

3.

    Raise the wing from field position to the desired degree of folded 

wing placement (fully extend hydraulic cylinder). 

4.

    With the wing in position, extend the telescoping tube of the wing 

rest to the most extended position setting hole possible and replace the 

stop bolt and retighten. 

5.

    Adjust the wing rest arm from the base by loosening the set bolt 

and rotating the the wing rest arm until the wing rest plate becomes 

flush with a bare space on the wing and retighten.

6. 

   Retract the internal hydraulic cylinder until the wing is fully 

unfolded and in the rigid position. 

WARNING! AVOID CRUSHING

. 

MAKE SURE ALL PER-

SONNEL ARE CLEAR OF IMPLEMENT AT ALL TIMES IM-

PLEMENT IS IN MOTION. BE AWARE OF OBSTRUCTIONS 

ABOVE, BELOW, AND AROUND IMPLEMENT WHEN IN 

OPERATION OR TRANSPORT. INJURY OR DEATH CAN 

RESULT FROM BEING STRUCK BY THE IMPLEMENT.

7. 

   Re-loosen the set bolt for the wing rest arm and slightly rotate the 

wing rest arm outward so that when wing is in the folded position, the 

weight of the wing will rest upon the wing rest and not on the internal 

hydraulic cylinder.  

8.

    Retighten the wing rest arm set bolt. 

ADJUSTABLE WING REST

Set Bolt

Telescoping

Tube

Stop Bolt

WARNING

3 - 8

Содержание 8315 Cultivator
























































Отзывы:

Нет отзывов