Orolia Spectracom VersaPNT, Руководство по началу работы

Страница: 6 / 46

1.1.1 Input Timing Interfaces
Table 1-1:
VersaPNT timing inputs (default setup)
INPUT SIGNAL
Total
available
DCLS
RS-
232
RS-
485
ETH
Connector No.
(see Fig.
above)
TTL 10V
1PPS (1) 1 4
ASCII/HaveQuick/IRIG B (1) 1 4
ASCII/NMEA (1) 1 4
Network Interface
(10/100/1000bT):
NTP (Stratum 2), PTP (2) 1 5
All Multi I/O interfaces (connector no. 4) are software-configurable, see "Assigning I/O
Pins" on page 23 .
1.1.2 Output Timing Interfaces
Table 1-2:
VersaPNT timing outputs (default setup)
OUTPUT SIGNAL
Total
available
DCLS
RS- 232 RS-485 ETH
Connector No.
(see Fig. above)
TTL 10V
10 MHz (1+3) SMA 3
1PPS (2) 1 1 4
ASCII/HaveQuick (1) 1 4
ASCII/NMEA (1) 1 4
NTP server,
PTP v2 master (1) 1 5
All Multi I/O interfaces (connector no. 4) are software-configurable, see "Assigning I/O
Pins" on page 23 .
1.1.3 Navigation Inputs & Outputs
The following VersaPNT options apply to the INS option board. The standard INS
OUT connection will communicate your position and navigation information, while the
Options 1-8 provide additional information via the multi I/O connector:
2 VersaPNT Getting Started Guide Rev. 3.0
1.1 Interfaces Overview