Oriental motor BX2 Driver Edition Series, Руководство по эксплуатации

Страница: 15 / 28

15
Connection
6.2 Connecting the power supply (CN1)
Connect a power supply to the main power supply input terminals (CN1).
A power supply cable is not included with the product. Provide a power supply cable separately.
Applicable lead wire
• Lead wire size: AWG18 to 14 (0.75 to 2.0 mm
2
)
• Conductive material: Use only copper wires.
• Lead wire strip length: 10 mm (0.39 in.)
Applicable crimp terminal
If crimp terminals are used, select the following terminals.
Manufacturer: PHOENIX CONTACT GmbH & Co. KG
Model: FKC2,5/6-ST-5,08
Manufacturer PHOENIX CONTACT GmbH & Co. KG
Model
AI 0,75-10 [AWG18 (0.75 mm
2
)]
AI 1-10 [AWG18 (0.75 mm
2
)]
AI 1,5-10 [AWG16 (1.25 mm
2
)]
AI 2,5-10 [AWG14 (2.0 mm
2
)]
Single-phase 100-120 VAC 50/60 Hz Single-phase 200-240 VAC 50/60 Hz Three-phase 200-240 VAC 50/60 Hz
L
N
L 1
L 2
L 1
L 2
L 3
Connect the live side to terminal L, and
the neutral side to terminal N. Connect the live side to terminal L1,
and the neutral side to terminal L2.
If either of them is connected to
terminal L3, the motor does not rotate. Connect the R, S and T phase lines to
L1, L2 and L3 terminals, respectively.
6.3 Circuit breaker
Be sure to connect a circuit breaker to the power line of the driver to protect the primary circuit.
Rated current of protective device: 15 A for single-phase input driver, 10 A for three-phase input driver
Circuit breaker: Mitsubishi Electric Corporation NF30
6.4 Grounding
Two Protective Earth Terminals are provided on the driver. Either of the two Protective
Earth Terminals can be used for grounding the driver. A terminal not having grounded is
provided as an extra terminal. Use it as necessary such as a purpose for connecting a motor
to ground. Do not share the Protective Earth Terminal with a welder or any other power
equipment.
Protective Earth Terminal on driver
• Applicable crimp terminal: Insulated round crimp terminal
• Terminal screw size: M4
• Tightening torque: 1.2 N·m (10.6 lb-in)
• Applicable lead wire: AWG18 to 14 (0.75 to 2.0 mm
2
)
Ground either of two terminals