14
Connection
6 Connection
This chapter explains how to connect the motor and power supply to the driver. Refer to the USER MANUAL for details.
6.1 Connection example
Electromagnetic brake motor (200 W, 400W)
Required
Required
Encoder connector
Connect to CN4
Motor power connector
Connect to CN2
Electromagnetic brake connector
Connect to CN3
external setting device
PAVR-20KZ
or external DC voltage
Connect to CN7
Input signals
Connect to CN5
Output signals
Connect to CN7
Grounding
Grounding
Connection cable
Connection cable
Motor
cable
Encoder
cable
Main power supply
Connect to CN1
Regeneration resistor
Connect to CN1
Note
•
Be sure to use the dedicated connection cable (sold separately) to connect the motor.
•
Regardless of whether an electromagnetic brake is equipped or not, always connect the electromagnetic brake
connector to CN3.
•
Connect the connectors securely. Insecure connections may cause malfunction or damage to the motor or driver.
•
Do not wire the power supply cable of the driver in the same cable duct with other power lines or motor cable.
Doing so may cause malfunction due to noise.
•
When turning on the power again or inserting/pulling out the connector, turn off the power and wait until the CHARGE
LED is turned off. Residual voltage may cause electric shock.
Details about setting
functions of operation data
⇒
USER MANUAL
Connecting CN5, CN7
⇒
USER MANUAL
Содержание BX2 Driver Edition Series
Страница 7: ...7 Precautions for use...
Страница 13: ...13 Installation...