Grounding Information
s
CAUTION
s
This appliance must be grounded. If it should malfunction
or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric
shock. This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug. The
plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances.
s
WARNING
s
Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the
plug provided with the appliance - if it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-volt
circuit, and has a grounded plug that looks like the plug
illustrated in Sketch A (see next column). A temporary
adapter that looks like the adapter illustrated in Sketch B
(see next column) may be used to connect this plug to a
2-pole receptacle, if a properly grounded outlet is not
available. The temporary adapter should be used only until
a properly grounded outlet can be installed by a qualified
electrician. The green colored rigid ear, lug, or the like
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in
place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not
permitted by the Canadian Electrical Code.
Grounding Methods
GROUNDED
OUTLET BOX
GROUNDING
PIN
Sketch A
Sketch B
METAL
SCREW
GROUNDED
OUTLET
ADAPTER
Orbiter
®
Model 700 is intended for
Household Use.
Orbiter
®
Model 600 is intended for
Household Use.
Orbiter
®
Model 550 is intended for
Commercial Use.
E
N
G
L
I
S
H
CAUTION
This appliance must be connected to a grounded
metal, permanent wiring system; or an
equipment-grounding conductor must be run with
the circuit conductors and connected to the
equipment-grounding terminal or lead on the
appliance.
ALWAYS UNPLUG THE MACHINE BEFORE
INSTALLING OR REMOVING ACCESSORIES.
ALWAYS WEAR SHOES WHEN USING
ELECTRICAL EQUIPMENT.
SAVE THESE INSTRUCTIONS
Warranty
Oreck Corporation (Oreck) gives you the following
limited warranty for this product only if it was originally
purchased for use, not resale, from Oreck or an ORECK
AUTHORIZED Dealer.
Orbiter
®
700 Series
(black unit with chrome highlights)
Oreck will repair or replace, free of charge, to the original
purchaser, any part, which is found to be defective in
material or workmanship within ten
(10)
years of the date
of purchase for all models. Not intended for commercial
use; any commercial use voids the warranty. This limited
warranty applies to normal model specific intended use.
Orbiter
®
600 Series
(cremé unit with blue highlights)
Oreck will repair or replace, free of charge, to the original
purchaser, any part, which is found to be defective in
material or workmanship within one
(1)
year of the date
of purchase for all models and a five
(5)
year limited
motor warranty for 600 series residential models. Not
intended for commercial use; any commercial use voids
the warranty. This limited warranty applies to normal
model specific intended use.
Orbiter
®
550 Series
(metallic finish unit)
Oreck will repair or replace, free of charge, to the original
purchaser, any part, which is found to be defective in
material or workmanship within one
(1)
year of the date
of purchase for all models. The 550 series
Orbiter
®
Multi-Floor Machine is intended for commercial use.
Additional Warranty Information
for all Orbiter
®
models:
Components returned prepaid to an Oreck Factory
Authorized Service Center or to Oreck will be repaired or
replaced free of cost at the option of Oreck and/or its
service center when upon examination by either of them,
such components are found to be defective.
3
