background image

E

N

G

L

I

S

H

Laminate, Vinyl and

Linoleum Floor Applications

Procedure:

1.

Lightly spray Premist

®

Soil Release Pre-Spray over the

soiled area in the carpet or high traffic area.

2.

Use the Orbiter

®

Multi-Floor Machine and the white 

terrycloth bonnet to lift dirt from the treated area. 
Work terrycloth bonnet over the treated area.

3.

Turn terrycloth bonnet over when soiled and continue
to clean carpet.

4.

When the job is complete, clean the white terrycloth 
bonnet in the washing machine using cold water or 
hose off and allow to air dry.

Surface Cleaning

Timberworks

®

Floor Cleaner restores the natural beauty of

all your hard flooring 

(not for use on stone, tile, or

waxed floors)

. It safely and effectively removes the dirt,

scuffs and grime from your floors to reveal their original
and beautiful luster.

Equipment and Material Required:

• Orbiter

®

Multi-Floor Machine

• Black Drive Pad Holder
• White Terrycloth Bonnet
• Timberworks

®

Floor Cleaner

• White Polish Pad (optional) 

Procedure:

To clean hard flooring, including polyurethane-coated
wood, laminate, vinyl and linoleum floors, use the
Timberworks

®

Floor Cleaner and the 

Orbiter

®

Multi-Floor

Machine with the white terrycloth bonnet.

1.

Lightly mist a 6 ft by 6 ft area with Timberworks

®

Floor Cleaner (a little goes a long way).

2.

Clean the treated area with the Orbiter

®

Multi-Floor 

Machine and the white terrycloth bonnet.

3.

Floors should shine with a beautiful luster. 
Timberworks

®

Floor Cleaner will not leave a residue; 

any streaking or clouding may be the result of a 
build-up of other floor cleaners. If necessary, repeat 
procedure until floor shines.

4.

If desired, vinyl and laminate flooring can be polished 
to a higher luster using the white polish pad after 
cleaning.

See Timberworks

® 

bottle for complete instructions.

Scrubbing 

This procedure can be used on hard floor surfaces,

EXCEPT

WOOD FLOORS.

Equipment and Material Required:

• Orbiter

®

Multi-Floor Machine

• Black Drive Pad Holder
• Brown Strip Pad or Blue Scrub Pad depending on 

floor surface

• Orange Scrub Brush
• Vacuum, Broom or Dust Mop

• Cleaning Solution
• Interior Circle (Donut Hole) from Brown Strip Pad or 

Blue Scrub Pad

• Mops - 2 (1 to apply/pick up Cleaning Solution and 

1 to rinse floor)

• Bucket and wringer
• Wet-Dry Vacuum (optional)

Procedure:

1.

Vacuum or sweep floor area to be cleaned with 
broom or dust mop.

2.

Mix cleaning solution according to manufacturer’s 
instructions on container label.

3.

Apply cleaning solution in a 6 ft by 6 ft area.

4.

Let solution stand for 5 minutes, scrub floor with 
Orbiter

®

Multi-Floor Machine and brown strip pad or

blue scrub pad.

5.

Use orange scrub brush on floors with cracks, 
crevices, and grout.

6.

Use interior circle (donut hole) from the brown strip 
pad or blue scrub pad to clean in corners and 
around door jambs by hand.

7.

Pick up dirty solution with mop or wet-dry vacuum. 

DO NOT ALLOW CLEANING SOLUTION TO 
DRY ON FLOOR.

8.

Repeat Steps 3-6 until all floor area is cleaned.

9.

Mop or use Orbiter

®

Multi-Floor Machine with the

white terrycloth bonnet and clean water to rinse the 
floor area.

Precautions:

1.

Do not flood the floor area with cleaning solution 
or allow solution to dry before pick-up.

2.

Use clean mop for final rinse.

3.

Change rinse water frequently.

4.

Use damp cloth to wipe off any splashes on walls 
or furniture.

Stripping

This procedure can be used on most types of hard floor
surfaces, 

EXCEPT

WOOD & STONE FLOORS, to remove

buffable floor wax or coatings.

Equipment and Material Required:

• Orbiter

®

Multi-Floor Machine

• Black Drive Pad Holder
• Brown Strip Pad
• Vacuum, Broom or Dust Mop
• Wax Remover or Stripping Solution
• Interior Circle (Donut Hole) from Brown Strip Pad
• Mops - 2 (1 to apply/pick up Cleaning Solution and 

1 to rinse floor)

• Bucket and Wringer
• Wet-Dry Vacuum for dirty and rinse water pick-up

(optional)

Procedure:

1.

Vacuum or sweep floor area to be stripped with 
broom or dust mop.

2.

Mix stripping solution according to manufacturer’s 
instructions on container label.

6

Содержание ORBITER 550 Series





































Отзывы: