OrCam User Guide
Version 7
Page
6
LED Indicator and Ports
LED Indicator
is near the volume button. The light may be steady or may blink.
When the light is flashing red, it indicates that the OrCam device is charging.
When the light is green, it indicates that the OrCam device is powered on. When
there is no light, it indicates that the OrCam device is suspended or powered off.
Ports
are on the same side as the Trigger button. There are two ports beneath the
protective rubber flap. The circular one is the port for the charger and the other is
the mini-USB port, which can be used to charge the OrCam device.
Connector Cable and Audio Out
Base Unit to Head Unit Connector Cable
The Base Unit is connected to the Head Unit via a cable that plugs into a fitted
connection at the end of the Base Unit. Please do not attempt to disconnect the
Head Unit from the Base Unit unless specifically directed to do so by an OrCam
representative, as this may harm the device. If instructed to do so, press and hold
the Head Unit Connector Release Button located beside the Head Unit Connector
on the Base Unit, and gently remove or insert the connector out of or into the
socket.
Audio Out
You may want to connect earphones or speakers to the Base Unit. There is an
audio out socket beside the cable that connects the Base Unit to the Head Unit
(on the opposite side of the release button) which is used to connect earphones
or speakers. The OrCam device will
automatically detect when earphones
or an external speaker are connected
and change the OrCam device output
to be from the external device only and
not from the Head Unit speaker.
Audio Out
Socket
Head Unit
connector
release button
