OrCam User Guide
Version 7
Page
22
learning sequence. Please position yourself approximately three feet from the
other person and ask the other person not to move for a few seconds, as you hold
your head steady.
Face Learning Mode Messages
In the Face Learning mode, you may hear some of the following messages:
Please name the person in front of you after the beep.
Record product name after the beep. Speak clearly and loudly for best result.
Press button to confirm adding person, or press volume button to record
again.
Press the trigger button to confirm the recording and adding of the product or re-
record the product name by pushing the volume button.
Person learned.
OrCam has completed the face learning process and the face has been successfully
added.
Face learning not successful, [Person is too close/far/not centered/not facing
you,] it is best to stand in front of a person from three feet away.
The face is not positioned correctly in front of you, adjust the angle between you
and the person and ensure the person is facing you and looking toward you.
Cancelling learning.
Button was not pressed to confirm adding a new face.
Too many faces detected. Cancelling learning.
More than one face is in the camera’s view. To teach a new face, position yourself so
that the camera can only see one face at a time.
Not enough light for learning.
The current lighting in the room is not sufficient to allow the OrCam device to learn
a new face. Please try again in an area with brighter lighting.