OrCam User Guide
Version 7
Page
30
7.6.
Configure key combo entry to the set up menu
: when enabled (default)
holding the trigger and volume button at the same time will enter the
Audio Settings Menu. When disabled this key combination will change
the reading rate.
Note:
O
nce disabled, you will need to use the “OrCam Please Enter Setup
Menu” command to access the Audio Settings Menu if you wish to re-enable.
7.7.
Camera Light Compatibility
: choose between Europe 50Hz or USA 60Hz.
7.8.
Tap State
: choose between enabled and disabled (default). When
enabled this feature allows you to trigger the device by tapping the
center of the base unit.
7.9.
Audio Output Device
: between auto-detect (default), the built-in
earpiece, the Audio Out socket, or both at the same time.
7.10.
Reset to Default
: restores all settings to factory default settings.
8.
Exit
: to exit the settings menu.
*
[Items marked with an asterisk are] Not available in OrCam MyReader.
OrCam Please Commands
The OrCam Please commands provide direct access to OrCam device settings. By
pointing (thus triggering the device) at the “OrCam Please” phrases that appear in
this guide and on the OrCam website, it is possible to adjust the settings of the
OrCam device according to the specified command text. When the command has
been received successfully, the device will play a distinct tone.
Note:
When pointing to “OrCam Please” commands, the device may not read the
command, but rather perform the command. The relevant confirmation message
will be played.
Any of the “OrCam Please” phrases can be printed individually or read from a
computer or smartphone screen - it is not required that you read them from this
User Guide. The text should be printed or displayed alone, without surrounding
