OrCam User Guide
Version 7
Page
20
Messages relating to Reading
If the OrCam device is having trouble reading, you may hear one of the following
messages:
There may be more text out of view above/below/on the left/on the right. To
read it, turn/tilt your head a bit to the left/right/above/below (or lower/raise
the text) and try again.
The viewed section of text is not visible by the camera, either above or below the
frame, or on the right or left side of the frame. The OrCam device cannot read the
complete section. Try to adjust the angle of your head and/or move the position of
the text and try again.
Text may be too close. Some of the text may be cut-off.
Text is cut by margins of frame (both left and right).
Skipped one line / [this many] lines of unreadable text.
Text was identified but not readable - skipping a single line / several lines of
unreadable text. Try to read that section again.
Repeating from the beginning.
Announced when pointing to the same section of text after reading it once through
completely.
Can't read text / text seems blurry, please try again in a brighter area.
Text is unreadable due to poor lighting conditions.
The text seems upside-down. To read it, rotate the page and try again.
Page is recognized as text that is being held upside down.
