User manual
FLEXI 50
30
If the Wi-Fi router capacity is not enough to connect a required number of the units, you may use an extra
wireless access point to connect the other the unit. Several Master units can optionally be connected to the
network for arranging a zone control.
9.15
Connecting master and slave ventilators
To connect a Master and a Slave ventilators, set the DIP switches on the units to the Master and Slave positions,
respectively (see section Setting the ventilator operation mode using DIP switches). Then set up the Wi-Fi
parameters of the Master ventilator.
While completing the connection make sure that the slaved ventilators are within wi-fi
coverage of the master ventilator
After changing the wi-fi parameters of the master ventilator repeat the connection steps!