User manual
FLEXI 50
29
Enter your access point password and press the
Apply
button.
Client- the unit operates on the home router network.
Enter the home router details and the IP address type for the
Client
mode
.
•
Enter the name of the Wi-Fi home router access point.
•
Enter the password for the Wi-Fi home router access point.
Select IP address type:
DHCP
: the IP address is set up automatically upon connection to the home
router (recommended).
Static
: enables manual entry of the desired IP address, subnet mask and
default gateway. These settings are recommended for expert users only.
Select this IP address type at your own risk.
Then press the
Apply button
.
9.14
Diagram za brezžično povezavo prezračevalnih sistemov
Wiring diagram 1
Connection of up to 8 Slave units or mobile
devices to the Master unit with its own
wireless access point.
In case of connection of 8 Slave units to the
Master unit with its own wireless access
point a mobile device may not be connected.
Wiring diagram 2
The Master units, the Slave units and the mobile devices are connected to a wireless access point of the Wi-
Fi router. In this case, the Master unit can operate with the number (N) of Slave units, limited by the technical
characteristics of the router.
