Orban OPTIMOD-FM 5518, Руководство по эксплуатации

Страница: 127 / 217

5518-FM DIGITAL OPERATION
3-3
To Create or Save a User Preset
Once you have edited a preset, you can save it as a user preset. The 5518 can
store an indefinite number of user presets, limited only by available memory.
However, most 5518 users will only require one user preset, which reflects the
customization they did during initial setup. (See steps 19 through 26 starting on
page 2-16.)
The 5518 will offer to save any edited, unsaved preset when the main screen is
visible. To save a preset:
A) Press the
ESC
button repeatedly until you see the main screen, which shows
the current time and the preset presently on air.
If there is an unsaved preset on air, the rightmost button will be labeled
S
AVE
P
RESET
.
B) Press the
S
AVE
P
RESET
button.
The Save Preset screen appears.
C) Choose a name for your preset.
Some non-alphanumeric characters (such as < and >) are reserved and
cannot be used in preset names.
D) Use the knob to set the each character in the preset name. Use the
Next
and
Prev
buttons to control the cursor position.
E) Press the
S
AVE
C
HANGES button.

You cannot give a user preset the same name as a factory preset. If the
name that you have selected duplicates the name of a factory preset, the
5518 will suggest an alternate name.

If the name you have selected duplicates the name of an existing user pre-
set, the 5518 warns you that you are about to overwrite that preset. An-
swer Y
ES
if you wish to overwrite the preset and N
O
otherwise. If you an-
swer N
O
, the 5518 will give you an opportunity to choose a new name for
the preset you are saving.
You can save user presets from the 5518 PC Remote application. (See Using the
5518 PC Remote Control Software on page 3-8.) Please note that when you save
presets from the PC Remote application, you save them in the 5518’s memory (as
if you had saved them from the 5518’s front panel). The PC Remote application
also allows you to
archive presets to your computer’s hard drive (or other storage
device) and to restore them. However, archiving a preset is not the same as sav-
ing it. Archived presets reside on a storage medium supported by your computer,
while saved presets reside in the 5518’s local non-volatile memory. You cannot
archive a preset until you have saved it. (See
To back up user presets, system files,
and automation files onto your computer’s hard drive on page 3-11.)
Note that if, for some reason, you wish to save an unmodified preset (ei-
ther Factory or User) under a new name, you must temporarily make an
arbitrary edit to that preset in order to make the
S
AVE
P
RESET
button ap-