Orban OPTIMOD-FM 5518, Руководство по эксплуатации

Страница: 71 / 217

5518-FM DIGITAL INSTALLATION
2-33
C) Press the
Escape
button to leave the Security menu.
To Unlock the Front Panel:
A) On the 5518 front panel, operate any button or the knob.
The
P
ASSCODE screen will appear.
B) Enter a passcode using the four soft buttons.
The 5518 functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in
Setup > S
ECURITY
> A
UTOLOCK . (You can set a
new delay at any time if you have an
A
LL
A
CCESS passcode.)
Dial-up Networking and the Passcode
When you make a Windows Dial-up Networking connection, Windows will ask you
for your passcode. To allow the connection to occur, enter any passcode that you set
at the 5518’s front panel. Once your PC is connected to the 5518, you will be able to
access the 5518 functionality corresponding to the security level of your passcode.
If you have not set a passcode, leave the Windows dialog box blank.
If You Have Forgotten Your Passcode
You can reset factory defaults and wipe out security passcodes (in case you forgot
your
A
LL
A
CCESS passcode).
A) Remove power from the 5518.
B) While pressing both the
Escape
and
Setup
buttons, restore power.
The Restore Defaults screen appears.
C) To gain access to the 5518, press the
E
RASE
A
LL
P
ASSCODES soft button.
D) Reprogram passcodes as necessary; see To Create a Passcode on page 2-31.
The RESTORE DEFAULTS button (in the Restore Defaults screen) restores
all System Setup and Input/Output parameters to their factory default
settings. It also erases all passcodes. You should never need to use this
button in an existing installation, although it is a convenient way to
make the 5518 “factory fresh” if it is being installed in a different facility.
The RESTORE DEFAULTS button takes you to a screen that allows you to
keep or erase any user presets that exist in your unit.