Orban OPTIMOD-FM 5518, Руководство по эксплуатации

Страница: 76 / 217

2-38
INSTALLATION ORBAN MODEL 5518
[no error message is issued]
In the above table:
XXXXXXX
= the preset name;
PASSCODE
= any valid passcode.

If a non-existent control value and/or an invalid passcode is entered, the 5518
will ignore the command. If a non-existent preset name is entered, your Optimod
will return an error message to indicate that the preset you entered does not ex-
ist.

You can apply this command anytime after the 5518 boots up.

This command is useful in interfacing automation systems to the 5518.
2. To turn the analog diversity delay on or off for a given output:
Command Response
DE XXX[PASSCODE]
(valid passcode and argument)
DIVERSITY DELAY: [ON,OFF] (for each
output)
(invalid passcode)
[no error message is issued]
In the above table:
XXX = ANALOG_ON, ANALOG_OFF, DIGITAL1_ON,
DIGITAL1_OFF, COMPOSITE_ON, COMPOSITE_OFF,
or
?
PASSCODE = ANY VALID PASSCODE
.

If a non-existent control value and/or an invalid passcode is entered, the 5518
will ignore the command.

You can apply this command anytime after the 5518 boots up. The 30-minute
timeout does not apply.
3. To set the analog diversity delay:
Command Response
TR X.XXXXXXXXX[PASSCODE]
(valid passcode and argument)
DELAY: X.XXXXXXXXX
(invalid passcode)
[no error message is issued]
In the above table:
X.XXXXXXXXX
= the delay time. Acceptable values are
0.000015625 to 8.192 for the 8-second board and
0.000015625 to 16.384 for the 16-second board
(10 total digits) in increments of 0.000015625