Orban OPTIMOD-FM 5518, Руководство по эксплуатации

Страница: 133 / 217

5518-FM DIGITAL OPERATION
3-9
5518 PC Remote can control only one 5518 at a time, but it can readily switch be-
tween several 5518s. 5518 PC Remote has a built-in “address book” that allows it to
select and connect to:

any 5518 on the same network as the PC,

a 5518 that can be accessed through a modem connected to the PC via dial-up
networking, and,

a 5518 that is connected directly to the PC’s serial port.
Before your PC can communicate with a given 5518, you must first set up a “connec-
tion,” which is information that allows PC Remote to locate and communicate with
the 5518.
To set up a new connection:
A) Launch 5518PC.exe.
B) Create a new 5518 connection by choosing
N
EW
5518
from the
C
ONNECT
file
menu or by right-clicking on the
A
LL
C
ONNECTIONS
icon in the Connections List
and selecting
N
EW
5518.
The Connection Properties dialog box opens.
C) Enter an Alias name for your 5518 (like “KABC”).
D) Leave the password field blank to prompt the user to enter a password when
initiating a connection.
Refer to Security and Passcode Programming on page 2- 30 .
Otherwise, enter a password to allow PC Remote to connect to your 5518
without requiring a password when the connection is initiated.
To initiate a successful connection, a password must have already been
entered into your 5518 unit.
E) If you are communicating with your 5518 through a network, select the
Ethernet radio button and enter the appropriate IP address, subnet mask,
port, and gateway data. Note that these values must agree with the values
that you set in your 5518 (see step 1 on page 2-42). See also
Setting Up
Ethernet, LAN, and VPN Connections on page 2-49.
If you are communicating via a direct serial cable connection or a modem
connection, follow the appropriate procedure described in
Appendix: Set-
ting up Serial Communications, starting on page 2-51.
F) Click OK after entering all required information.