Orban opticodec 7200, Руководство пользователя

Страница: 75 / 90

OPTICODEC E 75
OPTICODEC 7400
System Setup
Assuming the satellite receiver can indicate an opto-
decoupled error message, you can connect this information
to the alarm/control interface. If the error message is ON,
the OPTICODEC will automatically establish an ISDN
connection to the relevant entry number. If the error
message signal is OFF, the OPTICODEC will disconnect
an existing ISDN connection.
Up to 8 individually configured connection partners can
be called by using switches. The audio parameters and
connection relevant information are programmed in the
‘Data Input’ menu. A LED connected to the corresponding
OUTPUT of the alarm/control interface will light up indi-
cating that an ISDN connection has been established and
that the decoder is in SYNC.
If the switch has been opened, the ISDN connection will
be disconnected.
When switching on the unit or for e.g. after a power fai-
lure, the OPTICODEC automatically begins establishing a
connection provided the following has been set up in the
ISDN telephone directory:
Select ‘Data Input’ in the main menu and confirm using
the ‘Enter’ button. The input mask of the ISDN directory
appears.
Applications by Using
Backup Settings:
Satellite/ISDN Redundcy
‘Panic Dial’
Automatic
Connection Start