Orban opticodec 7200, Руководство пользователя

Страница: 69 / 90

OPTICODEC E 69
OPTICODEC 7400
System Setup
Port
Auto Detect
Audio Transmission
Buffer Management
An important part of the TCP/IP model are the port numbers,
also known as socket numbers. With these ports, it is advised
which service is desired (pls. s. ‘Port’ on page 38).
The value 6137 should always be entered for the
OPTICODEC.
This function is for the automatic recognition of units using
a control software (for e.g. NETControl) and can only be
used in a local area network. This function should remain
disabled to control units outside of the network area
The settings for audio transmission over the network are
found in this menu.
This buffer serves as a bridge for short-term interruptions
during transmission. The size of the buffer (which stores the
audio data) can be influenced.
For the most reliable transmission, the maximum value (bar
to the far right) should be set. This results, however, in a
greater delay.
The bar can be adjusted further to the left should a lower
delay be important but this negatively influences the trans-
mission reliability.