Orban opticodec 7200, Руководство пользователя

Страница: 73 / 90

OPTICODEC E 73
OPTICODEC 7400
System Setup
The OPTICODEC has a sample rate converter at the
audio input and output.
For the external SYNChronization of the digital output you
can select between:
DISABLED Word clock is generated from the transmission
clock
DIGITAL IN Word clock is generated from the AES or
S/PDIF input signal
SYNC IN Word clock is taken from the SYNC IN
Should the signals be switched off, the Alarm/Control In-
terface will behave as described on page #14. Otherwise
you can select between:
CON The signal is set at Pin 19, as soon asthe
decoder is SYNChronized – i.e. when the
connection is ‘OK’.
DIS The signal is set at pin 18, if the line had
been disconnected from the partner unit or
due to an ISDN failure
CON+DIS Both signals are set.
An entry from the ISDN Directory can be allocated to
each input of the Alarm/Control Interface in the backup
settings.
This is done by selecting the respective input with the
cursor and confirming with the ‘Enter’ button. A square
cursor now blinks and a number can be entered using
the digital keypad.
Interfaces
External Sync Input
Alarm Signals
Backup Settings