Orban opticodec 7200, Руководство пользователя

Страница: 18 / 90

% /04)#/$%#
The OC PC Remote software is a 32-bit version for Microsoft
Windows 98/2k/ME/XP for the remote control of the OPTI-
CODEC over the RS232 interface using a PC. It covers the
same adjustment parameters as the OPTICODEC itself.
To avoid any misunderstanding, the ‘OPTICODEC PC
Remote’ is referred to on the following pages as ‘OC Remote’
or ‘OC Remote software’.
The licensee may not copy the software or the included
original documentation or own any such copies. Furthermo-
re, the licensee may not change, adapt, translate, duplicate,
loan, lease or in any other form supply the availability of
the software or service instructions as a whole or any part
thereof. It is strictly forbidden to reengineer or disassemble
the software, or in any other way and means attempt to trace
the source code. Due to the further development for product
improvement of the present series units and alterations of
certain industrial parts, it cannot be avoided that some parts
might not be fully compatible. Different component modifi-
cations can lead to different configuration options. Deviating
program sections in the software are therefore possible.
All technical information may be subject to change without
notice.
The connection between the PC and your OPTICODEC
occurs via a serial 9-pole or a 25-pole cable (KB003 male/
female).
Connected to PC Connected to OPTICODEC
Description
Note
Information
Connection
to PC
/04)#/$%#0#2EMOTE
)NTRODUCTION
System requirements: Microsoft Windows
98/2k/ME/XP and a free PC serial in-
terface.