Orban opticodec 7200, Руководство пользователя

Страница: 38 / 90

% /04)#/$%#
/04)#/$%#0#2EMOTE
3YSTEM3ETUP
This menu contains the setting for audio transfer over the
network with TCP and UDP protocols.
For the OPTICODEC, the value 6136 should always be
entered.
For easier identification of devices on the network, the
name of your OPTICODEC must be entered here without
name length restrictions. This name is transmitted to the
'NETControl' program and shown in the device list.
An important part of the TCP/IP model are the port num-
bers, also known as socket numbers. With these ports, it
is advised which service is desired.
One distinguishes between two categories of ports:
the so-called 'defined‘ or 'well-known ports‘, which are
assigned by IANA (Internet Assigned Number Authority)
and which cover a number range from 0 to 1023;
and the “dynamic ports”. Therefore only port numbers from
1024 to 65535 may be entered here.
For the OPTICODEC, the port number 6137 is to be en-
tered.
A comparison between TCP/IP and ISDN:
Audio Port (TCP)
TCP/IP Remote Control
Unit Name
Port
TCP/IP ISDN
IP Address ISDN Number
Port Bearer capability (for e.g.
telephone / data transmission)