8
Timer
You can choose between «Professional» or «2-Minute»
timer.
The «2-Minute» timer signals with a long stuttering
sound and a flashing light of the Smart Ring (2) that the
professionally recommended 2-minute brushing time
has been reached.
The «Professional» timer signals with a short stuttering
sound and a flashing light of the Smart Ring at
30-seconds intervals to move to the next quadrant of
your mouth (picture
➂
). A long stuttering sound and a
flashing light indicate the end of the professionally
recommended 2-minute brushing time.
The timer memorizes the elapsed brushing time, even
when the handle is briefly switched off during brushing.
The timer resets if pausing longer than 30 seconds,
briefly pressing the mode button (4) during pause or
placing the handle on the plugged-in charger.
Note: During the use of special Oral-B™ app features,
the visual timer light may be deactivated.
Timer setup:
Your toothbrush comes with the «Professional» timer
activated. To change this, press and hold the mode
button (4) for 2 seconds. Toggle between timer
selection by pressing the on/off button (3). Confirm
selection by pressing the mode button.
• 2 LED’s illuminated indicate «2-Minute» timer
• 4 LED’s illuminated indicate «Professional» timer
Note: You can also set/advance the timer functionality
via Oral-B™ App.
Pressure sensor
If you put excessive pressure on your teeth, the Smart
Ring (2) will light up in red and the motor speed will be
reduced in «Daily Clean», «Pro Clean» and «Sensitive»
mode (picture
➂
). Periodically check the operation of
the pressure sensor by pressing moderately on the
brush head during use.
Brushing modes (depending on model)
Your toothbrush offers different brushing modes
indicated on the brushing mode display (6) on your
handle («Daily Clean» mode does not illuminate on the
brushing mode display):
«Daily Clean»
– Standard mode for daily mouth
cleaning
«Pro Clean»
– For an extraordinary clean
feeling (operated with a higher
frequency)
«Sensitive»
– Gentle, yet thorough cleaning
for sensitive areas
«3D White»
– Polishing for occasional or
everyday use
«Gum Care»
– Gentle massage of gums
«Tongue Clean»
– Tongue cleaning for occasional
or everyday use
When operating the «Tongue Clean» mode, we
recommend using the «Sensitive» brush head. You can
brush your tongue either with or without toothpaste.
Brush the whole area of your tongue systematically in
gentle movements. The recommended brushing time is
20 seconds; indicated with a flashing light of the Smart
Ring.
Your toothbrush automatically starts in the mode
selected last. To switch to other modes, successively
press the mode button during use (picture
➃
). To return
from any mode back to «Daily Clean» mode, press and
hold the mode button (4).
Note: You can also set/advance the mode functionality
via Oral-B™ App.
Brush heads
Oral-B offers you a variety of different Oral-B brush
heads that fit your Oral-B toothbrush handle.
Our
oscillating-rotating brush heads
can be used for
tooth-by-tooth precision cleaning.
Oral-B CrossAction brush head
Our most advanced brush head. Angled
bristles for a precise clean. Lifts and
powers away plaque.
Oral-B FlossAction brush head
features micropulse bristles that allow for
an outstanding plaque removal in the
interdental areas.
Oral-B 3D White brush head
features a special polishing cup to
naturally whiten your teeth. Please note
that children under 12 years old should
not use the Oral-B «3D White» brush
head.
Oral-B Sensitive brush head
features an extra soft bristle structure
that is gentle on teeth and gums.
