Oracle SPARC Enterprise M4000, Инструкция по установке и обслуживанию

Страница: 86 / 182

3-8 External I/O Expansion Unit for SPARC Enterprise M x 000 Servers Installation and Service Manual • April 2011
Caution – Do not apply excessive pressure on the upper card locks. Too much
pressure will bend the PCI card bracket. See
FIGURE 3-9
.
FIGURE 3-9
Excessive Pressure Bends the PCI Card Bracket
13. Pull the carrier handle into the fully open position to raise the carrier plate.
If the carrier plate is not completely raised, the bottom edge will hit the card socket
in the I/O boat in
Step 14 and Step 15 .
14. Carefully place the replacement carrier in the card guides at the top and bottom
of the carrier slot in the I/O boat.
15. Push the carrier into the carrier slot.
Caution – Do not press the carrier handle while you push the carrier into the slot.
Push only the front of the carrier when seating the carrier in the slot. Pushing the
carrier handle might damage the carrier plate by causing it to drop down before the
carrier is fully seated in the slot.
16. Push the carrier handle into the closed position (
FIGURE 3-10
).
This action seats the PCI card in the card socket.
Figure Legend
1 Moderate pressure on an upper card lock holds the PCI card in a horizontal position.
2 Excessive pressure bends the PCI card bracket.