Opus OFC195C Скачать руководство пользователя страница 8

Страница: 8 / 48

ABOUT YOUR COUPLING

The OPUS

comes as standard with a pressed steel coupling suitable for all standard 50mm

tow ball fittings.

If your OPUS

Camper has the optional Winterhoff 3000 or iSC stabiliser hitching coupling then your

tow vehicle should be fitted with either an extended neck flange tow ball or any form of detachable
‘swan-neck’ tow ball would be suitable.

IMPORTANT! ADDITIONAL INFORMATION REGARDING SAFE USE AND STABILISING
FUNCTION OF THE COUPLING MUST BE ADHERED TO.

If you have a locking coupling it must be unlocked to enable

hitching and unhitching of the Camper. A security ball is

provided for securing the Camper when unhitched from a

tow

vehicle.

The Full Stop Saracen Hitch Lock (optional extra) will provide

additional security to your Camper).

ABOUT YOUR PLUG

The OPUS

is fitted with a 13-pin plug that connects all the

exterior trailer lighting as well as the connections that

enable the leisure battery of the OPUS

to be charged by

your vehicle whilst in transit. This connection also allows the

fridge (optional extra) to operate a cooling function whilst

towing

using the 12v socket in the cupboard directly

underneath the fridge, which is wired directly to the 13-pin

plug, bypassing the Camper’s 12v electrical circuit.

HITCHING, UNHITCHING & SAFE TOWING.

STANDARD COUPLING

OPTIONAL LOCKING COUPLING

iSC/WS3000 STABILIZER COUPLING

OPTIONAL HITCH LOCK

13-PIN PLUG

Содержание OFC195C

















































Результаты поиска

Содержание OFC195C

Отзывы:

Opus OFC195C, Руководство пользователя, Страница: 8 / 48

Результаты поиска

Содержание OFC195C

Отзывы: