Opus OFC195C, Руководство пользователя, Страница: 19 / 48

16
SETTING UP THE ADDITIONAL BED.
The seating area inside the OPUS ® can be reconfigured to provide an additional bed. Each seat
section is numbered on the back, please see diagrams for reference.
The furniture of the Camper with the inclusion of the table forms the base of the additional bed;
the table is reinforced to provide adequate support for sleeping. Please see the images for
guidance.
1. Firstly positon the table top in the positon shown above to form the base section of the
additional bed.
2.
Arrange the cushions as shown above. Cushions 5,6 & 7 are not required for the additonal bed
and can be removed.
3.
The two bolster cushions fit into cushion number 2 - where cushion number 6 would usually sit.
Then postion cushion 4 to the far left, followed by cushions 1,3 & 8 to form the bed.
IMPORTANT! REFER TO THE CONDENSATION AND VENTILATION SECTION ON PAGE 38.
CLUB LOUNGE/SEATING AREA ASSEMBLED. CONVERTED TO ADDITIONAL BED.
POSITION TABLE TO FORM BED BASE ARRANGE CUSHIONS COMPLETED SETUP
2
BOLSTERS
3
8
7
6
2
5
1
4
1 4 3 8