
EXTERNAL CARE FOR YOUR OPUS
®
•
Inspect the outside panels of your OPUS
®
including the roof (bed lids) for any damages and
cracks.
•
Inspect the sealant around the panels to verify that there is adequate bonding around the body
panels and exterior features such as the battery box. This is especially important after an impact/
accident to the Camper to ensure the integrity of the body’s resistance to water ingress.
•
Regularly check the seals (centre and perimeter) of the Camper, to ensure there has been no
damage. Ensure the Camper is packed properly to seal the Camper and prevent water ingress.
•
Keep the body and the roof of the Camper clean, it is best to clean any mud and dirt off the
Camper immediately after every journey to maintain the clean finish of the Camper.
•
Prolonged exposure to mud, dirt and salt may deteriorate the finish of the Camper.
•
The body of the Camper can be washed with soap and water using a soft sponge, rinse-off the
Camper thoroughly after washing.
•
A damp cloth may be preferred especially for small spots and dirt.
•
Specialist products such as Care-avan Waterless Wash & Shine may be used where/when
adequate water is not readily available. Read and follow the instructions carefully and it is
advisable to try any product to be used on the Camper on a small inconspicuous spot to ensure/
verify it is suitable before full use.
•
For storage it is recommended to use the roof and/or storage cover to keep the roof (and the
body) clean.
•
Any form of damage or scratch to the paint work or finish of the Camper on the body may be
repaired or cleaned by using a suitable ‘touch up’ stick/paint. Contact OPUS
®
Camper directly for
further information.
•
If your Camper has been Vinyl Wrapped to a custom colour care must be taken to prevent
peeling of the wrap if a scratch or tear has occurred on the body panel.
•
Caring for the roof cover is important; ensure the awning beading at the front is inserted
properly without snagging the material. A suitable lubricant can be used to aid this. Pull the front
corners over the body and repeat at the back, the roof cover should have a snug fit without stress
at any of the corners. Secure the cover using the bungees on the button cleats attached to the
side and rear body panels around the Camper.
•
The button cleats are primarily for the tent and NOT all are required to secure the roof cover.
•
The cover MUST be fitted whenever the Camper is not in use/in storage.
•
The cover may be left on when the Camper is set up; it simply needs to be folded/rolled neatly
towards the front of the Camper and laid on the gas/storage locker.
36
Содержание OFC195C
