optris PI 400 LW, Руководство оператора

Страница: 19 / 52

optris PI LightWeight Kit
– E2013-04-B
17
Switch Positions
The mode switch is set default to S1. At position S2 the IR camera which is
connected to the USB-A socket will be linked directly with the Mini-USB socket.
With this you get a direct access to the IR camera from a PC which is connected
to the Mini USB socket without changing cables on the NetBox LW.
Mode switch (S1/ S2)
Operation Modes of the NetBox LW
The NetBox LW can be used in three different operation modes:
1. Stand-alone operation with an IR camera (Standard mode)
2. Ethernet direct connection to a PC (point-to-point connection)
3. Ethernet communication via a network or via the internet
For powering the NetBox you can use instead of a lithium-polymer battery also the supplied power adapter.
Alternatively the NetBox can also be powered via the Ethernet cable (PoE
– Power over Ethernet). For this
purpose a PoE injector is needed [part#: ACPIPOE].