optris PI 400 LW, Руководство оператора

Страница: 44 / 52

optris PI LightWeight Kit
– E2013-04-B
42
To save changed settings or if you want to install additional software the write protection has to be
deactivated temporarily. To do this please move the cursor to the red dot in the task bar and push the right
mouse button:
You can select between four different actions:
Save and reboot Changes will be saved + Restart
Save and shutdown Changes will be saved + shut down
Standard write mode Switch into the write mode (green dot)
Reboot Restart without saving of changes
The SSD drive of the NetBox has by factory default two partitions. The write protection refers to partition C
only. On the partition D you can save application data. On drive D also the calibration data of the infrared
imager are stored.