optris PI 400 LW, Руководство оператора

Страница: 34 / 52

optris PI LightWeight Kit
– E2013-04-B
32
After you have made these settings and connected your PC with the NetBox using an Ethernet cable your
PC will establish a point-to-point connection. This procedure can take several minutes.
In the
Network and Sharing Center your network will now be shown up as a non-identified network .
Please start now the PIConnect on your PC and open the menu item
Tools/ Extended/ Remote devices... .
In the window which is appearing you should set a hook on Enable and enter the IP address of the NetBox
( 192.168.0.100 ). Press OK. The software will establish a connection to the remote device (imager)
automatically.