A41.1950 Operating Microscope, Dual Head, Motor Zoom, 3x~16x. For Neurosurgery, Brain Surgery, ENT
3
1.Foot controller
2.
Focusing pedal
3.Zooming pedal
4.
Obliquity rocker
5.Base
6. Base Locking knob
7. Power line
8.Foot controller socket
9.
Fuse cover
10.Electric control box 11.Main stand
12. Main power switch
13.Illumination switch
14.Brightness
regulative
knob
15. Main body of the
head
16.
Chief
operator
observing system
17.handle controller
18. Head joint
19.
Locking pin
20. Locking knob
21.
Locking nut
22. Focusing
cable
23. Obliquity control
cable
24. Locking knob
25. Safety valve
26. Cantalever
27. Force Balancing
knob
28. Locking knob
29. Lamp frame
30. Transversal Arm
31. Locking knob
32.
Handgrip
33.Bolt
3 Installation
Before installation, please read the following sections carefully. Please appoint
professional technicians or request the manufacturer to carry out installation.
3.1 In The Package
The microscope is packed into 4 boxes:
Box 1 for microscope observing system:
including microscope head (1 piece); chief
operator observing system (1piece ); five spare lamps; three lamp frames; one
dustproof coat; one Operation Manual and all accessory you chose.
Box 2 for microscope frame:
including one transversal arm; one cantilever and one
foot controller.
Box 3 for microscope
electric control box
:
including main stand and Electric control box.
Box 4 for microscope base:
there is one base in it.
3.2 Installation process of the operation microscope
Refer to Fig.2 and following correlative pictures.
Step 1:
Take out the Base (5) of microscope from Box 3, put it on neat floor and fix it with
Base locking knob (6)
Fig.3
Step 2:
Unload the 12 screws of M6 on two sides of the main stand (11), open and take out the
electronic box (10) from the front of the stand
①
, firstly use 8 screws of M6 to tighten the
lower part of the stand with the base firmly
②
; and similarly use 6 screws of M6 to tighten the
upper part of the stand with the cantilever firmly
③
.
5.Base
6.Base locking knob