Optiva VTDVR5100 Tytanium DVR series, Инструкция по установке и эксплуатации

Страница: 87 / 232

VTDVR5100 Digital Video Recorder
87
AGC (Auto Gain Control)
AGC is the function to control the range of video signal input from carame connected. After press
[ENTER], use [ ◄ ] or [ ► ] button to set “Enable/Disable”.
Brightness/Contrast
It can control Brightness and Contrast of video. After press [ENTER], use [ ◄ ] or [ ► ] button to set the
value wanted from each “–9” to “+9”.
Covert
Covert “On” to hide channel at monitor mode.
After press [ENTER], use [ ◄ ] or [ ► ] button to set “On / Off”.
PTZ Home/PTZ Idle Time
This menu is to setup camera that supports PTZ(Pen/Tilt/Zoom). When PTZ control, it move to Preset
assigned in case of no movment for certain time (PTZ Idle Time).
After press [ENTER], use [ ◄ ] or [ ► ] button to set Preset number and Time.
* Refer to “8.3 Using PTZ” for the detailed setup and available camera list that support PTZ.
PTZ Port
The menu is to set connected camera that support PTZ(Pen/Tilt/Zoom). After press [ENTER], use [ ◄ ] or
[ ► ] button to set PTZ port connected to the relevant channel.
* Refer to “8.3 Using PTZ” for the detailed setup and available camera list that support PTZ.
Address
This menu is to setup camera supports PTZ(Pen/Tilt/Zoom). When press [ENTER], Letter input window
is displayed to setup basic address of PTZ device.
* Refer to “8.3 Using PTZ” for the detailed setup and available camera list that support PTZ.
16.1.3. Quick Recording Setup
Quick Recording is the menu for easy recording in same condition for all analog channels. Quick
Recording can be set through ‘Recording’ in Quick Setup menu.