Optiva VTDVR5100 Tytanium DVR series, Инструкция по установке и эксплуатации

Страница: 143 / 232

VTDVR5100 Digital Video Recorder
143
(1) Use the arrow key to select DVR at Select Mirroring Device menu and press ENTER.
(2) Press “Apply” and ENTER to save.
(3) Select OK at pop up window and press ENTER.
(4) The entire HDDs installed are formatted and the status of Rack A,B are changed to [M](Mirroring)
while the status of Int A,B is changed to [V].
(5) Select Int A,B and select “Add” at Action menu and ENTER “apply”.
(6) Select OK at pop up window and press ENTER.
(7) The status of HDD is changed from [V] to [R] and it can be used as a storage device in DVR.
(8) Exit from the menu after configuration and check if every set up is saved normally. The front LED
blinks green for the users to check if it works normally and the LED of the HDD that is not saving
data is lighting in red.