Optiva VTDVR5100 Tytanium DVR series, Инструкция по установке и эксплуатации

Страница: 136 / 232

VTDVR5100 Digital Video Recorder
136
<How to register Remote Controller>
- Face Remote controller toward eDVR.
- Press “ID” button on controller when eDVR is responding.
- If ID of Controller does match with ID of eDVR, all Alarm LED of eDVR is ON and sounds.
- It is capable to use after ID match.
- Refer to “Installation Guide” for the details.
Keyboard Control Addr
This menu is to set Keyboard address when all functions of eDVR is controllered by Keyboard button.
Default value is set to “1”. If several eDVRs connect to a keyboard, 1 channel can clash. Then set to the
other address of keyboard.
DVR ID
This menu is set the name of eDVR.
Record No Video
If this is “On”, it records video image which is not input.
Playback Deinterlace On/Off
The “Deinterlace mode” only runs when the recording resolution is in Full D1.
In case of enable it, the Full D1 image with Pause condition the picture will have less tremor.
Ext. port Policy
Available for configuration of USB 2.0 / IEEE1394.
It is not available to use USB2.0 if the user uses IEEE1394 and on the contrary, if the use uses USB, the
IEEE1394 is not available to use. The DVR automatically reboot when those configuration is applied.
Encording Policy
Recording Prior / Networking Prior can be set.
If it set to Networking Prior, besides basic recording resolution, it can monitor with low resolution or
QCIF resolution in according to condition to PC client due to additional compression to QCIF.
When it sets to Recording Prior, when PC monitoring, it shows to the resolution set in Schedule
Recording always.