Version 1.2.8 - 2020-08-03
8
Translation of original operating manual
MT50
GB
MT
5
0_GB
_1.
fm
1.2.1 Classification of hazards
We classify the safety warnings into various levels. The table below gives an overview of the
classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
1.2.2
Other pictograms
1.3
Intended use
WARNING!
In the event of improper use, the milling-machine
will endanger personnel,
the milling-machine and other material property of the operating company will be
endangered,
the correct function of the milling-machine may be affected.
The milling-machine is designed and manufactured to be used in a non-explosive environment.
The milling-machine is designed and manufactured to be used for milling and drilling cold met-
als or other non-flammable materials or materials that do not constitute a health hazard by
using commercial milling and drilling tools.
The milling-machine must only be installed and operated in a dry and well-ventilated place.
The table housing of the cross table included in the scope of delivery can be used as chip and
spray guard. If necessary, the chip and splash guard on the milling table can be removed, if this
is not required for the operation.
Ideogram
Warning alert
Definition / consequence
DANGER!
Threatening danger that will cause serious injury or death to people.
WARNING!
A danger that might cause severe injury to the personnel or can lead to
death.
CAUTION!
Danger or unsafe procedure that might cause injury to people or damage to
property.
ATTENTION!
Situation that could cause damage to the milling machine and products and
other types of damage.
No risk of injury to people.
INFORMATION
Application tips and other important or useful information and notes.
No dangerous or harmful consequences for people or objects.
In case of specific dangers, we replace the pictogram by
or
general danger
by a warning of
injury of hands,
hazardous
electrical voltage,
rotating parts.
