Version 1.2.8 - 2020-08-03
48
Translation of original operating manual
MT50
GB
MT
5
0_GB
_5.
fm
6.3
Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. For this reason, all the intervals are only valid for the intended operating conditions.
Interval
Where?
What?
How?
Start of work,
after every
maintenance or
repair work
M
ill
in
g-mach
in
e
Start of work,
after every
maintenance or
repair work
Mo
bi
le mach
in
e
parts
Oiling
All mobile machine parts such as guides, feed screws,
spindle nuts must be oiled in regular intervals.
Always slightly oil bare surfaces.
Lubricate lifting spindle of the cross table using ball bear-
ing grease.
Oil at these lubricating point positions.
Img.6-1:
Oiler cup
Lubricate at these lubricating point positions.
Img.6-2:
Lubricating nipple
Oiler cup
Lubricating nip-
ple
