manualshive.com logo in svg

Optimum OPTimill F 150, Руководство по эксплуатации

Поделиться
Скачать
Optimum OPTimill F 150 Скачать руководство пользователя страница 6

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

Version 1.1.6  dated 2014-10-16

Page 6

Original operating instructions

F150

GB

Before commissioning the machine please thoroughly read these operating instructions and get familiar with
the machine. Please also make sure that all persons operating the machine have read and understood the
operating instructions beforehand. 
Keep these operating instructions in a safe place nearby the machine. 

Information

The operating instructions include indications for safety-relevant and proper installation, operation and
maintenance of the machine. The continuous observance of all notes included in this manual guarantee the
safety of persons and of the machine. 
The manual determines the intended use of the machine and includes all necessary information for its eco-
nomic operation as well as its long service life. 
In the paragraph "Maintenance" all maintenance works and functional tests are described which the opera-
tor must perform in regular intervals. 
The illustration and information included in the present manual can possibly deviate from the current state of
construction of your machine. Being the manufacturer we are continuously seeking for improvements and
renewal of the products. Therefore, changes might be performed without prior notice. The illustrations of the
machine may be different from the illustrations in these instructions with regard to a few details. However,
this does not have any influence on the operability of the machine. 
Therefore, no claims may be derived from the indications and descriptions. Changes and errors are reser-
ved!
Your suggestion with regard to these operating instructions are an important contribution to optimising our
work which we offer to our customers. For any questions or suggestions for improvement, please do not
hesitate to contact our service department.

If you have any further questions after reading these operating instructions and you are not able to solve your
problem with a help of these operating instructions, please contact your specialised dealer or directly the
company OPTIMUM.
Optimum Maschinen Germany GmbH 
Dr.- Robert - Pfleger - Str. 26 
D-96103 Hallstadt 
Mail:       [email protected]
Internet:   www.optimum-maschinen.

Содержание OPTimill F 150



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды