Optimum OPTimill F 150, Руководство по эксплуатации

Страница: 57 / 162

OPTIMUM
M A S C H I N E N - G E R M A N Y
User interface, machine control panel
Version 1.1.6 dated 2014-10-16 Page 57 Original operating instructions
F150 GB
<PAGE DOWN> + <SHIFT>
In the program manager and in the program editor, from the cursor
position, selects directories or program blocks up to the end of the
window.
<PAGE DOWN> + <CTRL>
Positions the cursor to the lowest line of a window.
<Cursor right>
•
Editing field
Opens a directory or program (e.g. cycle) in the editor.
•
Navigation
Moves the cursor further to the right by one character.
<Cursor right> + <CTRL>
•
Editing box
Moves the cursor further to the right by one word.
•
Navigation
Moves the cursor in a table to the next cell to the right.
<Cursor left>
•
Editing field
Closes a directory or program (e.g. cycle) in the program editor. If you
have made changed, then these are accepted.
•
Navigation
Moves the cursor further to the left by one character.
<Cursor left> + <CTRL>
•
Editing field
Moves the cursor further to the left by one word.
•
Navigation
Moves the cursor in a table to the next cell to the left.
<Cursor up>
•
Editing box
Moves the cursor into the next upper field.
•
Navigation
-
Moves the cursor in a table to the next cell upwards.
- Moves the cursor upwards in a menu screen.
<Cursor up> + <CTRL>
•
Moves the cursor in a table to the beginning of the table.
• Moves the cursor to the beginning of a window.
<Cursor up> + <SHIFT>
In the program manager and in the program editor, selects a contiguous
selection of directories and program blocks.
Excerpt from the manual of the operating instructions for "SINUMERIK 828 D"
Key Function