OPTIMUM Maschinen 3111020 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 84

background image

Safety

Version 1.0 - 2020-12-10

8

Translation of original operating instruction

GT22

EN

GT22_G

B_1

.f

m

1.4

Intended use

WARNING!

If the surface grinding machine is not used as intended,



this may result in hazards for personnel,



the surface grinding machine and other material assets of the operator may be
endangered,



the function of the surface grinding machine may be affected.

The surface grinding machine is used exclusively for precision grinding of plane steel work-
pieces. The surface grinding machine must only be installed and operated in a dry and well-
ventilated areas. The machine integrated coolant system is only intended for water-miscible
cooling lubricants.

The surface grinding machine is designed and constructed for use in non-explosive environ-
ments.

If the surface grinding machine is used in any way other than described above, modified without
authorization of Optimum Maschinen Germany GmbH, then the surface grinding machine is
being used improperly.

We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.

We expressly point out that the guarantee or CE conformity will expire, if any constructive, tech-
nicalor procedural changes are not performed by the company Optimum Maschinen Germany
GmbH.

It is also part of intended use that you



comply with the performance limits of the surface grinding machine,



observe the operating instructions,



the inspection and maintenance instructions are observed.

WARNING!

Extremely severe injuries due to non-intended use.

It is forbidden to make any modifications or alternations to the operating parameters
values of the surface grinding machine. They could pose an accident hazard to persons
and cause damage to the surface grinding machine.

1.5

Reasonably foreseeable misuse

Any use other than that specified under "Intended use" or any use beyond that described will be
deemed non-intended use and is not permissible.

Any other use must be discussed with the manufacturer.

Warning: biological hazard!

Warning: suspended loads!

Warning of oxidizing

substances!

Caution, danger of

explosive substances!

Warning: danger of

slipping!

Protect the environment!

Contact address

«
...
6
7
8
9
10
...
»

Содержание 3111020





















































































Отзывы:

Нет отзывов

Похожие инструкции для 3111020

Бренд: Defort Страницы: 48

Grinding Jig G4570

Бренд: Grizzly Страницы: 2

Бренд: Master Страницы: 16

Бренд: Makita Страницы: 52

Бренд: Electrolux Страницы: 12

Бренд: Yamato Страницы: 13

Бренд: Hilti Страницы: 60

Бренд: WHITE BROWN Страницы: 8

Бренд: NUTOOL Страницы: 68

Бренд: Sunex Tools Страницы: 10

Бренд: tormek Страницы: 4

Бренд: Smeg Страницы: 15

Бренд: Diamatic Страницы: 75

Бренд: YATO Страницы: 124

Бренд: Kalamazoo Страницы: 5

Бренд: ODE Страницы: 8

Бренд: PALSON Страницы: 32

Бренд: Bosch Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды