Version 1.0 - 2020-12-10
23
Translation of original operating instruction
GT22
EN
GT22_G
B_3
.f
m
Design the working area around the surface grinding machine according to the local safety reg-
ulations.
The work area for operation, maintenance and repair must not be restrictive.
INFORMATION
In order to achieve high levels of functionality and machining accuracy, as well as a long ser-
vice life of the machine, the set-up location should meet certain criteria.
The following points should be noted:
The machine must only be installed and operated in a dry and well-ventilated place.
Avoid places near machines generating chips or dust.
The installation site must be free from vibrations also at a distance of presses, planing
machines, etc.
The ground must be suitable for the surface grinding machine. Make sure that the floor has
sufficient load-bearing capacity and is level.
The ground must be prepared in such a way that any coolant used cannot penetrate into
the ground.
Any parts sticking out such as stops, handles, etc. have to be secured by measures taken
by the customer if necessary in order to avoid endangering persons.
Provide enough space for set-up and operating personnel and material transport.
Also bear in mind accessibility for installation and maintenance works.
INFORMATION
The main switch of the surface grinding machine must be freely accessible.
ATTENTION!
Ensure that only experienced personnel transport, set up and install the machine.
