Operation DPA31
Version 1.0 - 2020-12-10
52
Translation of original instructions
DPA31
EN
D
P
A
3
1_
G
B
_3
.f
m
Positioning to a Coordinate Point on the Arc
INFORMATION
Press the button
to temporarily interrupt the function. The display returns to the normal
display status. Press the 0 key again to continue with the function.
To exit from the function, press the
button.
Parameters
Description
1 - 6 E_Po
End position: X-Y
2 - 6 E_Po
End position: Y-Z
3 - 6 E_Po
End position: X-Z
To enter the end position, use the numeric keys and confirm with the
key.
Parameters
Description
1 - 7 CUF
Machining depth: X-Y
2 - 7 CUF
Machining depth: Y-Z
3 - 7 CUF
Machining depth: X-Z
To enter the machining depth, use the numeric keys and confirm with the
key.
Parameters
Description
1Po Position:
X-Y
2Po Position:
Y-Z
3Po Position:
X-Z
To select the desired coordinate point, press the
button.
To select the previous coordinate point, press the
button.
Then move the machine axes until the positions of the selected coordinate point show 0.000. Repeat
these steps until the arc has been completely machined.
