Operation DPA31
Version 1.0 - 2020-12-10
51
Translation of original instructions
DPA31
EN
D
P
A
3
1_
G
B
_3
.f
m
Parameters
Description
1 - 3 0U_S
Machining mode of the arc on the coordinate plane: X-Y
2 - 3 0U_S
Machining mode of the arc on the coordinate plane: Y-Z
3 - 3 0U_S
Machining mode of the arc on the coordinate plane: X-Z
To set machining mode of the arc, use the numeric keys 0 or 1.
0 = Machining mode of the arc from the inside.
1 = Machining mode of the arc from the outside.
Confirm with the
key.
Parameters
Description
1 - 4 CU_d
Milling tool diameter: X-Y
2 - 4 CU_d
Milling tool diameter: Y-Z
3 - 4 CU_d
Milling tool diameter: X-Z
To enter the diameter of the milling tool, use the numeric keys
and confirm with the
key.
Parameters
Description
1 - 5 S_Po
Start position: X-Y
2 - 5 S_Po
Start position: Y-Z
3 - 5 S_Po
Start position: X-Z
To enter the start position, use the numeric keys
and confirm with the
key.
