Operation DPA31
Version 1.0 - 2020-12-10
48
Translation of original instructions
DPA31
EN
D
P
A
3
1_
G
B
_3
.f
m
Positioning the Coordinate Points
INFORMATION
Press the button
to temporarily interrupt the function. The display returns to the normal
display status. Press the 0 key again to continue with the function.
To exit from the function, press the
button.
Parameters
Description
1 - 5 E_A
End angle: X-Y
2 - 5 E_A
End angle: Y-Z
3 - 5 E_A
End angle: X-Z
To enter the end angle on the coordinate plane, use the numeric keys
and confirm with the
key.
Parameters
Description
1CHo
Coordinate point no.: X-Y
2CHo
Coordinate point no.: Y-Z
3CHo
Coordinate point no.: X-Z
To select the desired coordinate point, press the
button.
To select the previous coordinate point, press the
button.
Then move the machine axes until the positions of the selected coordinate point show 0.000.
