Operation
Version 1.0.2 - 2020-07-06
31
Translation of original instruction
DH 40CT | DH 40CTP
EN
D
H
4
0
CT_DH40CTP_G
B_4
.f
m
Loosen the knurled screw (10) for the prevention of automatic quill feed.
Drag the spindle sleeve lever (3) to right.
The spindle sleeve feed moves with the preset selected feed rate (9) downwards and is
switched off as soon as the preset drill depth of the scale ring (13) is attained. The spindle
sleeve is then returned to its home position by the resiliency of the recuperating spring.
4.9.2
Spindle sleeve feed with the manually fine feed
Img.4-7:
Spindle sleeve feed with the fine feed on DH40 CTP
To use the manual fine feed with the handwheel (4) :
Loosen the clamping lever (12) of the sleeve.
Set the feed speed on the selector switch (9) to "OFF".
Loosen the knurled screw (10) for the prevention of automatic quill feed.
Drag the spindle sleeve lever (3) to right.
Img.4-8:
Drill-mill head for milling
For milling the drilling-milling head must be clamped.
Tighten the clamping screws (27) 2 pcs. firmly.
Tighten the clamping lever spindle sleeve (12) firmly.
9
Selector switch for speed of feed
3
Spindle sleeve lever
12
Spindle sleeve clamping lever
4
Fine feed
10
Knurled screw for automatic quill feed
prevention
11
8
9
12
4
13
3
10
27
