Operation
Version 1.0.2 - 2020-07-06
29
Translation of original instruction
DH 40CT | DH 40CTP
EN
D
H
4
0
CT_DH40CTP_G
B_4
.f
m
INFORMATION
Observe the speed table on the milling drilling head when selecting the range of speed.
ATTENTION!
Wait until the spindle has come to a complete halt before changing the speed with the
gear selector switch.
A change of the gear ratio during operation can lead to the destruction of the gearbox.
4.6
Switching off the drilling milling machine
Press the push button Stop. For a long-term standstill of the drilling milling machine switch it
off at the master switch.
4.7
Drill depth stop
Use the drilling depth stop when drilling
several holes of the same depth.
The spindle can only be lowered to the
set value.
Img.4-3:
Drill depth stop
4.8
Spindle sleeve feed with DH40CT
4.8.1
Manual spindle sleeve feed with the fine feed
Turn the knurled screw (clockwise).
The spindle sleeve lever moves in
direction of the spindle head and acti-
vates the coupling of the fine feed.
Turn the quill fine feed in order to
move the quill.
Img.4-4:
DH40 CT fine feed
4.8.2
Manual spindle sleeve feed with the spindle sleeve lever
ATTENTION!
The clutch of the fine feed has to be disengaged before the spindle sleeve lever can be
used. Activating the spindle sleeve lever when the fine feed is engaged may damage the
clutch.
Loosen the knurled screw (counter-clockwise). The sleeve lever moves away from the spin-
dle head and deactivates the coupler of the fine feed.
Indicator drilling
depth
Setting screw for
drill depth stop
Knurled screw
Quill fine feed
