26
and source C is output 7 of OMM-1000 and the 3
rd
input of QDVI-O. To change A and C,
user makes source A be connected to output 7 of OMM-1000 (It will be the 3rd input of
QDVI-O) then, source A will be shown on the bottom left side of layout 5. As the same
method, if user allocate source C to output 5 of OMM-1000, it will be shown on the top left
side.
3. Scale-down error will happen when the
number of scale-down vertical pixels are less
than 1/5 (Progressive input case) or 1/4 (Interlaced input case) of original input
vertical pixels
. For example, in case of layout 6, if you use input resolution, 1280x1024
and set the output resolution of QDVI-O at 800x600, the number of vertical pixels of 1
st
2
nd
and 3
rd
inputs will be fitted into one third of output vertical pixels (600). In this case,
there would be an error because the number of scale-down vertical pixels, 200 (600/3) is
less than 204.8 (1024/5).
