OPTICON
Software Guide
MDL-1000/2000
139
8-31-8 Host Character Timeout (0xEF)
This parameter determines the maximum time it waits between characters transmitted by the host
before discarding the received data. The time-out is set in 0.01 second increments from 0.01
second to 0.99 seconds. After scanning the bar code below, scan 2 numeric bar codes on page
108 to set the desired time-out.
To change the selection or cancel an incorrect entry, scan “Cancel” bar code on page 108.
Host Character Time-out
(Default: 200 msec.)